Manufacturing

Best of Renewable Energy India Expo 2022 | mojo4industry exclusive Renewable Energy India Expo, popularly known as REI, Asia’s largest expo in the renewable energy space held between 28th and 30th September at Greater Noida, came to a close, with exhibitors from across the globe exhibited their most exciting and innovative products. REI demonstrated how the renewable sector is progressing, and that industry has the answers to the dual challenge of...

BERGEN’s Quest for Technology Supremacy | REI Exclusive In early 1980s, while enjoying a sunset and sunrise in Bergen, Norway, a young fellow was inspired to begin his journey as an entrepreneur in India. His vision was to bring new technologies in electronics manufacturing to India. His vision later translated into being the first few companies to bring solar technologies to India. And the journey continues in the green hydrogen...

ECE India targets 10,000 solar channel partners by 2032 “Right now, we are having more than 350 channel partners in Maharashtra, Madhya Pradesh and Chhattisgarh. We are planning 10,000 solar channel partners with us by 2032 and approximately 10 lakhs homes are expected to be solarized by ECE India,” reveals Amit Arokar, Founder & Director, ECE (India) Energies Pvt Ltd while talking to mojo4industry at REI 2022. Also, present at the...

Energy is Changing | Batterywali Dr. Rashi Gupta Dr. Rashi Gupta, Founder & MD of Vision Mechatronics, popularly known as Batterywali of India, is a prominent change agent in India who is making a difference in the field of technology and renewable energy. In an exclusive interview with Subhajit Roy, Dr. Rashi talks about India's clean energy transition. Talking about the market dynamics, she said, “Whenever we look at e-mobility, we...

Adani targets 10 GW of solar module manufacturing capacity by 2025 | Rahul Bhutiani Adani Group plans to invest USD 70 billion for setting up 3 giga factories for manufacturing solar modules, wind turbines, and hydrogen electrolyzers. Adani Solar, the solar PV manufacturing arm of Adani Group, also plans to enhance its solar module manufacturing capacity to 10 GW. In an exclusive interview with mojo4industry on the sidelines of Renewable Energy...

Powering the Adoption of EVs in India | Abhijeet Sinha | NH for EV Union Minister of Road Transport & Highway Nitin Gadkari recently unveiled the miniature of the state-of-the-art EV charging station conceptualised by the National Highways for EV (NHEV). The pilot is currently conducting its concluding phase of technical and commercial trial with buses and long-range electric SUV on the Delhi to Jaipur highway which would add 278 km...

IEEMA appoints Rohit Pathak as President for 2022-23 Indian Electrical and Electronics Manufacturers' Association (IEEMA) on Monday announced the appointment of Rohit Pathak as its new president for 2022-23. Mr. Pathak, CEO of Birla Copper (Hindalco Industries Limited), took over the reins from Vipul Ray at the 75th annual general meeting of the association held in Mumbai on Monday. In addition to this, the association also announced the appointment of office...

Siemens launches open digital business platform ‘Siemens Xcelerator’ in India Siemens Xcelerator is an open and evolving digital business ecosystem SMEs in India will be the greatest beneficiaries of this platform: Sunil Mathur Our aim is to help companies to increase their performance, flexibility & sustainability: Sunil Mathur India will play a key role in the global roll-out of Siemens Xcelerator: Peter Koerte Siemens announced the launch of ‘Siemens Xcelerator’...

Blue Energy Motors launches India’s first LNG-fuelled green trucks Blue Energy Motors launches India’s first Liquified Natural Gas (LNG) fuelled green truck at its recently inaugurated plant in Chakan, Pune, today. With a keen focus on developing LNG as an alternate-fuel, Blue Energy Motor’s heavy-duty and long-haul trucks powered by LNG are set to pioneer the green trucking revolution in India. The market entry of the LNG-fuelled trucks is starting with...

Why EVs are catching fire | World EV Day EXCLUSIVE Though EV is being considered as a sunrise sector, in the recent past, India's electric vehicles industry is facing the heat after a number of EVs went up in flames. At least eight incidents of fire on EVs were reported between March and April in different parts of the country. Early this year, EV makers reportedly recalled nearly 7,000 e-two...

Best Practices in Operation & Maintenance of Transformers | Easun MR | mojo4industry Best operation and maintenance practices are a must for the transformer to provide standard services for its entire designed life. On this note, mojo4industry presents this 20-minute Development Debate titled Best Practices in Operation & Maintenance of Transformers. Kamalesh Kumar Mishra, Sr. Manager – Marketing, Easun MR talks about state-of-the-art on load tap changers whereas Dilli Ganesh, Sr....

Latest Trends in Laser Cutting & Automation | Messer | mojo4industry The demand for laser cutting services is growing quickly. According to a Grand View Research study, the global laser cutting machine market is expected to reach $6.72 billion by 2024. Lasers have become a vital part of the automation process across the industry especially in shipbuilding, aviation, automotive and construction equipment manufacturing industries. Incorporating lasers into the manufacturing process can...

Best of Automation Expo 2022 | mojo4industry With over 700 Exhibitors represented across 400-plus stalls, Automation Expo 2022 held recently in Mumbai witnessed live demonstrations of cutting-edge technologies, new product launches and networking opportunities, brought together vendors and the user industries after a two-year hiatus. mojo4industry presents you this exclusive post event report featuring: Dynalog India Moxa Advantech Metravi Instruments Kumbhojkar Plastic Moulders Beckhoff Automation Vega India Schmersal India Kasstech Solutions Program...

Best Practices in Operation & Maintenance of Transformers | FREE Webinar | Easun MR Date & Time: 30 August, 3 PM  FREE registration link: https://bit.ly/mojo-30aug Best operation and maintenance practices are a must for the transformer to provide standard services for its entire designed life. On 30th August at 3 PM, mojo4industry will conduct 60-minute a development debate on this topic. Kamalesh Kumar Mishra, Sr. Manager – Marketing, Easun MR will talk about...

Delta displays ‘future-ready’ solutions at Automation Expo 2022 | Manish Walia On the sidelines of Automation Expo 2022, Manish Walia, Head, Automation Business, India, Delta Electronics talks to mojo4industry about the adoption of IIoT in India, Delta’s offerings, newly launched servo press etc. Delta offers automation products and solutions including drives, motion control systems, industrial control and communication, power quality improvement, human machine interfaces, sensors, meters, and robot solutions. The company...